RoHS Compliant Sealed Liquid Cells
In response to requests offered by the scientific community and contributing to a cleaner environment, REFLEX Analytical proudly and responsibly shares a new development in sealed liquid transmission cell sampling that is RoHS compliant. RoHS also known as Lead-Mercury-Free, stands for Restriction of Hazardous Substances. To eliminate the Lead and Mercury amalgam seal normally
associated with the older sealed liquid transmission cell designs, the new advanced design uses leak free fluoropolymer seals which are isolated from the liquid sample.
Scroll below for order details. All of the RoHS compliant sealed liquid transmission cells offer a 13mm FTIR circular aperture (as pictured). The Stainless Steel cell consists of a front plate with two welded luer fittings and PTFE plugs, a back plate, a PTFE pathlength spacer sandwiched between a 36mm circular drilled and undrilled window assembled with fluoropolymer seals. Choose from the following standard pathlengths: 0.015mm, 0.025mm, 0.05mm, 0.10mm, 0.20mm, 0.50mm, 1.0mm, 5.0mm and 10.0mm. Available transmission window materials include BaF2 Barium Fluoride, CaF2 Calcium Fluoride, Cesium Iodide CsI, KBr Potassium Bromide, KRS-5 Thallium Bromide Iodide, NaCl Sodium Chloride, IR-SiO2 IR Quartz, ZnSe Zinc Selenide and ZnS Zinc Sulfide. If required for quantification, cell calibration and matching is available as an optional service and should be indicated upon ordering.
Scroll below for order details. All of the RoHS compliant sealed liquid transmission cells offer a 13mm FTIR circular aperture (as pictured). The Stainless Steel cell consists of a front plate with two welded luer fittings and PTFE plugs, a back plate, a PTFE pathlength spacer sandwiched between a 36mm circular drilled and undrilled window assembled with fluoropolymer seals. Choose from the following standard pathlengths: 0.015mm, 0.025mm, 0.05mm, 0.10mm, 0.20mm, 0.50mm, 1.0mm, 5.0mm and 10.0mm. Available transmission window materials include BaF2 Barium Fluoride, CaF2 Calcium Fluoride, Cesium Iodide CsI, KBr Potassium Bromide, KRS-5 Thallium Bromide Iodide, NaCl Sodium Chloride, IR-SiO2 IR Quartz, ZnSe Zinc Selenide and ZnS Zinc Sulfide. If required for quantification, cell calibration and matching is available as an optional service and should be indicated upon ordering.
NaCl RoHS Sealed Liquid Cell $500.00 | KBr RoHS Sealed Liquid Cell $550.00 |
CaF2 RoHS Sealed Liquid Cell $725.00 | BaF2 RoHS Sealed Liquid Cell $850.00 |
ZnSe RoHS Sealed Liquid Cell $1,150.00 | IR Quartz RoHS Sealed Liquid Cell $1,325.00 |
ZnS RoHS Sealed Liquid Cell $1,595.00 | CsI RoHS Sealed Liquid Cell $2,095.00 |
KRS-5 RoHS Sealed Liquid Cell $2,895.00 | Cell Calibration & Matching Liquid cell calibration is required for quantitative analysis but if performing qualitative investigations, then cell calibration is not necessary. REFLEX Analytical's standard liquid cell calibration is within 10% of the cell's nominal pathlength for a single cell. If two or more cells are ordered and cell calibration & matching is required, then the cells are matched within 3% of the each cell's calibrated pathlength. |