REFLEX Analytical offers sealed and demountable liquid cells for use with the Transmission Cell Heating Jacket.
Each version is supplied as a completely assembled cell with windows and a spacer at the pathlength of your choice. Sealed cells have a lead spacer and lead top gasket and all components are permanently amalgamated together. Demountable cells have a teflon spacer and teflon top gasket and as such allow for windows and spacer pathlengths to be interchangeable.
Each static version stainless steel cell assembly provides for a 25 x 10mm clear aperture and includes a front plate with inlet/outlet plugs and thermocouple port, a back plate, front gasket, rear gasket, threaded luer fitting, flushing tube, syringe needle, (2) teflon washers, a 3/23" Allen key, lead or teflon spacer (specify 0.025mm, 0.05mm, 0.1mm, 0.2mm, 0.5mm or 1.0mm) and a choice of transmission window materials. The transmission materials available include but are not limited to NaCl Sodium Chloride, KBr Potassium Bromide, CaF2 Calcium Fluoride, BaF2 Barium Fluoride, and ZnSe Zinc Selenide. A K-type NiCr/NiAl or T-type Cu/CuNi thermocouple can be inserted in the cell's thermocouple port to monitor sample temperatures.
Optional flow through cells have an alternative front plate with 1/16" o.d. stainless steel tubing brazed to the
sample port positions. The flow tubes are assembled with Swagelok connection fittings such that other liquid
delivery type tubing can be connected to the cell front plate. It is recommended that this flow kit plate is supplied attached to the sealed cells. In this fashion, the flow plate is sealed to the front lead gasket and sealed window assembly. The threaded luer and flushing tube cannot be attached to the flow cell front plate.
Contact REFLEX Analytical to discuss your application and requirement for either a sealed, demountable or flow through type cell.