REFLEX Analytical offers custom evacuable cubic pellet dies. Scroll below for pricing and order details for sizes ranging from 2mm up to 38mm square dimensions.
Rectangular dimensions are available upon request.
The cubic dies are commonly used with our series of laboratory presses
. Each die is precision fabricated from high quality hardened 440C stainless steel. The assembly includes a die housing, die chamber, evacuable die base, two sets of anvils, a pellet plunger and extraction ring to facilitate sample pellet removal. The die chamber dimensions for cubic pellet die sizes up to 16mm are 32mm height x 35mm outside diameter with each anvil measuring 5.50mm thickness (two anvils are used for pellet fabrication). The die chamber dimensions for cubic pellet die sizes larger than 16mm up to 38mm are 110mm height x 68mm outside diameter with each anvil measuring 12.70mm thickness (two anvils are used for pellet fabrication). The radius of the cube is specified by the customer and due to the nature of fabrication, each cubic anvil will have a 0.005” flat where the top and bottom anvils interface. We can also produce plano-plano flat anvils with straight faces with customer specified radius at each right angle corner (four corners) to match the chamber wall radii. REFLEX Analytical welcomes your contact to discuss your application needs.
REFLEX Analytical recommends the review of the chamber height to confirm there is adequate height to fabricate a pellet to the desired pellet thickness. If required, the chamber height and plunger height can be adjusted accordingly. Offer request for quotation and indicate the required height. Furthermore, please assure there sufficient height between the top and bottom press rams.CLICK HERE
to preview other solid and semi-solid sampling accessories such as evacuable pellet dies, XRF dies, heated dies, manual and auto lab presses, polymer film makers, and much more.