500°C Stainless Steel Solids Cell
This high temperature solids cell permits transmission mode measurement of solid samples up to 500°C. The sample holder accommodates 25mm diameter up to 10mm thick solid samples and can operate with 25mm diameter transmission windows if desired making it suitable for analyzing mulls, pastes, films and other semi-solid materials. An optional insert for 13mm diameter pellets and 13mm transmission windows can be ordered separately.
The cell consists of a heated stainless steel cavity surrounded by an aluminum cooling jacket. A water cooled jacket maintains the outer surface at a safe temperature to prevent heating of the sample compartment. Two fixed K-type thermocouples are installed to independently monitor the temperature of the sample holder and the cell assembly. A low voltage heater is used in conjunction with a high stability automatic temperature controller with USB computer interface for accurate monitor and control. The assembly also incorporates two VCO fittings, chemical resistant o-rings and PTFE seals. The cell can be configured for breadboard and FTIR instrumentation. Click on the above image to enlarge and appreciate the precision engineering.
Scroll below to order. Recall to specify your spectrometer make and model. An optional choice of transmission materials include but are not limited to KBr Potassium Bromide, NaCl Sodium Chloride, BaF2 Barium Fluoride, CaF2 Calcium Fluoride and ZnSe Zinc Selenide.
If interested, CLICK HERE to preview a series of heated and high pressure gas cells capable of achieving temperatures up to 800°C and permitting a range of pressures from vacuum to 1000 psi. The cells are suitable for gas analysis, liquid vapor studies and solid or solid-gas decomposition studies and general extreme condition high temperature, high pressure investigations. REFLEX Analytical welcomes your contact to discuss your application demands.
The cell consists of a heated stainless steel cavity surrounded by an aluminum cooling jacket. A water cooled jacket maintains the outer surface at a safe temperature to prevent heating of the sample compartment. Two fixed K-type thermocouples are installed to independently monitor the temperature of the sample holder and the cell assembly. A low voltage heater is used in conjunction with a high stability automatic temperature controller with USB computer interface for accurate monitor and control. The assembly also incorporates two VCO fittings, chemical resistant o-rings and PTFE seals. The cell can be configured for breadboard and FTIR instrumentation. Click on the above image to enlarge and appreciate the precision engineering.
Scroll below to order. Recall to specify your spectrometer make and model. An optional choice of transmission materials include but are not limited to KBr Potassium Bromide, NaCl Sodium Chloride, BaF2 Barium Fluoride, CaF2 Calcium Fluoride and ZnSe Zinc Selenide.
If interested, CLICK HERE to preview a series of heated and high pressure gas cells capable of achieving temperatures up to 800°C and permitting a range of pressures from vacuum to 1000 psi. The cells are suitable for gas analysis, liquid vapor studies and solid or solid-gas decomposition studies and general extreme condition high temperature, high pressure investigations. REFLEX Analytical welcomes your contact to discuss your application demands.
500°C Solids Cell with Viton O-rings add choice of 32mm transmission windows (includes temperature controller with usb) $15,395.00 | 500°C Solids Cell with Kalrez O-rings add choice of 32mm transmission windows (includes temperature controller with usb) $15,950.00 |
Optional 13mm Pellet Insert add optional 13mm transmission windows $545.00 | Optional 13 x 2mm Transmission Windows select window material. sold as a pair. $90.00 |
Optional 25 x 2mm Transmission Windows select window material. sold as a pair. $110.00 | Optional 25 x 4mm Transmission Windows select window material. sold as a pair. $110.00 |
Required 32 x 3mm Transmission Windows select window material. sold as a pair. $130.00 | Optional VCO to Swagelok Adapter english thread $310.00 |
Optional VCO to Swagelok Adapter metric thread $310.00 |