15 Ton Automatic Hydraulic Laboratory Press

15 Ton Digital Auto Press

15 Ton Digital Auto Press
Item# 181-1365
$15,735.00
Send This Page to a Colleague

Product Description

REFLEX Analytical's introduces the latest ingenuity and engineering for a newly enhanced, cost effective automated laboratory press with digital control and color display. This laboratory accessory is a compact and rugged 15 ton press designed to automate production of pellets and tablets. The hydraulic power unit is electrically operated and completely self-contained operating for quiet and safe operation. The assembly consists of rigid construction with a 3.94" round platen, digital pressure gauge, digital dwell gauge and safety shield. There is also provision for utilities and vacuum line connections. The unitized base permits convenient installation requiring approximately one square foot.

Operating parameters are easily programmed with touch-screen entry and digital display. The ram stroke automatically opens and closes with single finger control. The electronics provide for up to four segment programmable pressure (1 – 15 tons, 0.10 ton increments) and dwell time (1 – 9999 seconds, 1 second increments) control for each operation. The rate of decompression can be managed by operator programmed bleed control. For added safety, the door is interlocked with an emergency sensor which prevents press operation if the door is open. The wide access door provides for a 5.9"H x 5.1"W maximum opening.

The press dimensions are 16.75"H x 8.7"W x 19"D. The ram stroke is 0.79" with maximum 6" daylight. Weighs 200 lbs. Assembled for 110V or 220V electrical input. CE models are available.

Contact REFLEX Analytical for quotation including freight fees to your destination. Please provide a complete shipping address.

CLICK HERE to preview other solid and semi-solid sampling accessories such as evacuable pellet dies and pellet molds, XRF dies, heated dies, manual and auto lab presses, polymer film makers, and much more.

Accessories

Standard Evacuable Pellet Dies
standard sizes range from 3 - 60mm diameter. CLICK HERE for more information and ordering
Standard Evacuable XRF Pellet Dies
standard sizes range from 20 - 60mm diameter. CLICK HERE for more information and ordering
XRF Conversion Die Kit Complete
includes a 40mm Evacuable Die with 20mm, 25mm and 32mm conversion die kits. CLICK HERE for more information
$7,395.00
3400
Oil-Less Vacuum Pump 110V
1/8 hp motor and vacuum gauge. size 7.625” x 5.125” x 8.0” and weighs 45lbs
$1,395.00
3874